Mini rib roofing sheet making machine, PPGI, metal sheets, T10
steel roof roll forming machine
General Introduction of the roofing machine:
A trapezoidal sheet roll forming machine is a regular metal sheet
roll former that produces metal roofing sheets or roof panels for
both individual and industrial building.
Trapezoidal roofing sheets are the most popular metal roof panels
not only for residential buildings but also for commercial or
industrial buildings. There are so many different profiles for a
variety of applications. People like to use low-profile trapezoidal
sheets for elevation and T roofing
Quick Detail:
- Thickness : 0.42mm-0.6mm
- Material : Pre-painted Coil, 345Mpa
- Input width : 1000mm
- Effective width: 985mm
- Material weight : 5MT or as per request
- Coil inner diameter : 510mm
- Cutting way: by hydraulic group, no waste cut
- Cutting tolerance : ±1mm
Description/Technical Parameter details of complete line:
- 5TX1000mm hydraulic de-coiler with/without coil car
Hydraulic system to expand coil inner hole, pump motor: 3KW
Coil OD= 510±30mm
Coil capacity: Max. 5Tons
Coil width Max. 1250mm
Taper wedge expand type
Driving motor to turn the coil, 3KW
- Entry Roller & Manual Pre-shearing device (Un-powered)
To cut off the end of the final piece of sheet only
Working thickness: max. 0.6mm
- Roll forming machine with cutting details as below table :
| Suitable roll forming material | Pre-painted Sheets, 245-550Mpa |
| Thickness range | 0.42mm-0.6mm |
| Coil width | 1000mm |
| Carriage Frame design | Wall-plate-frame-design /New-stand-frame-design |
| Roll forming stages | 6+1 stages Including one stage for embossing |
| Material of forming roller | 45# steel, CNC lathes, Hard Chrome Coated Option : with roller heat treatment |
| Shafts Diameter | Φ75mm |
| Main motor power | 5.5Kw with reducer |
| Rolling speed of roll former | 18m/min (Higher speed is available, depends on the specification
required by the buyer) |
| Hydraulic group power | 3.0 Kw |
| Material of cutting blade | Cr12, hear treatment as normal design |
| Electric Voltage Standard | 415V/50Hz/3Ph or as the customer's requirements |
| Major Color of Machine Painted | RAL 5015(Blue) or as per customer’s requirements |
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand
Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
- Product Rack Un-powered, 3 units
Machine list:
- Hydraulic un-coiler with/without coil cart
- Normal speed roll former
- Hydraulic cutting device
- Run out table or automatic stacking device for quick packing
- Siemens PLC and touch screen, Schneider brand inverter
Profile Drawing/Layout/Equipment reference pictures:
